-8%
Banks Power 13-18 Ram 6.7L Monster-Ram Intake System Gen-2 w/Fuel Line - Natural w/Heater System
Click to zoom in

Banks Power 13-18 Ram 6.7L Monster-Ram Intake System Gen-2 w/Fuel Line - Natural w/Heater System

Banks Power
GBE42798
In stock
Short Ram Air Intakes
$1,075.56 $984.92

Banks Power 13-18 Ram 6.7L Monster-Ram Intake System Gen-2 w/Fuel Line - Natural w/Heater System
The Banks Monster-Ram is the best-engineered intake elbow (horn) available for the 2013-2018 RAM Cummins 6.7L. Gain responsiveness and power efficiency. Improve Mass Air Flow by 88 percent over the stock intake. Prevents grid heater bolt failure. What it doesThe Monster-Ram improves airflow from the intercooler. It flows 72.7 lbs/min MAF (Mass Air Flow) with Banks' High-Flow Heater and Billet Intake Plate compared to stock's 38.6 lbs/min MAF.Monster-Ram raises boost without increasing backpressure at the turbine. The result is a more responsive, power-efficient engine that offers even more headroom than stock for higher horsepower applications.The complete systemBank's High-Flow Heater and Billet Intake Plate complete the perfect system. The High-Flow Heater allows for the removal of the restrictive stock heater grid plate. The new vertical coil-style heater provides the same functionality for cold starts as the stock grid heater but without obstructing airflow. Replacing the restrictive stock grid heater plate with the Banks High-Flow Intake Plate removes all obstructions and turbulence in the airflow path.How it was designedUtilizing the latest in CFD (computational fluid-dynamics), tested on the flow bench, the dyno, and on-road, Monster-Ram is a beast that only Banks could have unleashed. A direct-replacement aluminum casting, Monster-Ram is instant power, performance, and acceleration gratification. The factory inlet elbow is cramped and angular in order to accommodate the path of the stock No. 1 fuel line. Banks Engineers designed a new No. 1 fuel line, allowing the Monster-Ram to flow more air without obstruction.ExpandableWith four 1/8 inch NPT ports, perfect for temperature and pressure sensors, the sky's the limit for data acquisition.Beats the competitionLike all Banks products, the Monster-Ram was tested against all available competitors. It more than doubles the improvement over the closest competitor.

This Part Fits:

Year Make Model Submodel
2013-2018 Ram 2500 Big Horn
2013-2018 Ram 2500 Laramie
2014-2015 Ram 2500 Laramie Limited
2013-2018 Ram 2500 Laramie Longhorn
2016-2018 Ram 2500 Limited
2013-2015 Ram 2500 Lone Star
2013-2016 Ram 2500 Outdoorsman
2013-2018 Ram 2500 SLT
2013 Ram 2500 ST
2013-2018 Ram 2500 Tradesman
2013-2018 Ram 3500 Big Horn
2013-2018 Ram 3500 Laramie
2014-2015 Ram 3500 Laramie Limited
2013-2018 Ram 3500 Laramie Longhorn
2016-2018 Ram 3500 Limited
2013-2015,2017 Ram 3500 Lone Star
2013-2018 Ram 3500 SLT
2013 Ram 3500 ST
2013-2018 Ram 3500 Tradesman
Read More
Read Less

Your cart

×